PV2R Series Single Pump

Short Description:


Product Detail

Product Tags

Product Introduction

PV2R series of vane pumps with high pressure and lower noise are high-performance products, which are developed and domestically produced by our company, featured by advanced performance, reasonable structure, good creditability, lower noise, ultra-low pulse and stable quality and so on. Precisely made, the product can be used in the equipment with high precision and low noise, and is widely used in cutting, plastic, leather, forging and engineering machinery fields, and the like.

Direction of port

PV2R Series Single Pump (7)

Specifications

Model Displacement
(mL/r)
Max.pressure(MPa) Speed(r/min) Input power
(kW)
Special oil Antiwear oil Common oil Min. Max.
PV2R1-4 4.3 21 171.5 16 750 1800 2.1
PV2R1-6 6.5 3.2
PV2R1-8 8.5 4.5
PV2R1-10 10.8 5.4
PV2R1-12 12.8 6.1
PV2R1-14 14.5 6.9
PV2R1-17 16.2 7.9
PV2R1-19 20.1 9.6
PV2R1-23 22.5 10.5
PV2R1-25 25.3 12.5
PV2R1-28 29.6 14
PV2R1-31 32.3 16 16 15.5
PV2R2-26 25.3 21 17.5 14 600 1800 11.7
PV2R2-33 32.3 15.5
PV2R2-41 39.8 18.9
PV2R2-47 49.8 23.2
PV2R2-53 51.5 24
PV2R2-59 55.8 24.9
PV2R2-65 63.7 29.4
PV2R2-70 70.3 16 1200 31.6
PV2R2-79 78.1 35.7
PV2R2-85 82.7 37.5
PV2R3-52 51.5 21 17.5 14 600 1800 23.2
PV2R3-60 63.7 29.4
PV2R3-66 66.6 34.2
PV2R3-76 75.5 37.7
PV2R3-94 89.5 41.2
PV2R3-116 118 16 16 50
PV2R3-125 122.2 1200 59.9
PV2R3-136 136 66.7

Note:

1. When pressure of pumps exceeds 16MPa, with displacement of “4″”6″”8″, speeds should be more than 1450r/min.

2. Reduce the negative pressure of the inlet when the single pumps or double pumps with large displacement at high speed.

3. In use of synthetic hydraulic fluids and water containing hydraulic fluids, limit the max speed at 1200r/min.

4. Speed at 1000r/min is suggested on occasions with lower noise strictly required.

5. Noisiness is available in working conditions of 14MPa and 1200r/min.

6. Input power is available in working conditions of 16MPa and 1500r/min.

Double Pumps

Series Displacement of shaft end pump Displacement of cover end pump
PV2R21 26、33、41、47、53、59、65 4、6、8、10、12、14、17、19、23、25、28、31
PV2R31 52、60、66、76、94、116、125、136 4、6、8、10、12、14、17、19、23、25、28、31
PV2R32 52、60、66、76、94、116、125、136 26、33、41、47、53、59、65

Installation Dimensions

Single Pumps

PV2R Series Single Pump (8)

PV2R Series Single Pump (9)PV2R Series Single Pump (10)

Double Pumps

PV2R Series Single Pump (11)

PV2R Series Single Pump (12)

Shaft type

PV2R Series Single Pump (13)

Straight Key shaft

Model Shaft code A B C ΦD E F key width xlength
20V、20VQ、SQP1 1 59 9.53 12.1 22.23/22.20 24.5/24.4 4.76*32
25V、2520V
25VQ、2520VQ
SQP2、SQP21
1 59 9.53 11.1 22.23/22.20 24.5/24.4 4.76*32
86 78 9.53 11.1 25.37/25.35 28.3/28.1 6.36*50.8
35V、35V
35VQ、35VQ
SQP3、SQP3
1 73.2 9.53 11.1 31.75/31.70 35.36/35.1 7.94*38.1
86 86 9.53 11.1 34.90/34.87 038.6/38.3 7.94*54
45V、45V
45VQ、45VQ
SQP4、SQP4
1 62 12.7 14.22 31.75/31.70 35.36/35.10 7.94*28.5
86 87.4 12.7 14.22 38.07/38.05 42.4/42.1 9.54*50.8

Spline shaft

Model Shaft code A B C D E Spline data(see below)
20V、20VQ、 151 41.1 9.53 11.1 3.9 27.8 A
25V、2520V
25VQ、2520VQ
11 44.5 9.53 11.1 3.9 27.8 A
35V、35V
35VQ、35VQ
11 58.7 9.53 11.1 6.35 35.1 C
45V、45*V
45VQ、45*VQ
11 61.9 12.7 14.3 9.7 39.6 C

Spline Data Table(Involute spline)

Spline Data Reference Number of teeth Pitch Major Diameter Form Diameter Minor Diameter Minor Diameter
A 13 16/32 22.17/22.15 19.03 18.63/18.35 Major diameter fit
C 14 12/24 31.70/31.67 27.2 26.99/26.64

Port flange kits

PV2R Series Single Pump (14)

Flange
model
Corresponding
pipe
specifications
Dimensions mm GB3452.1-2005 PV2RSeries
C D E F H J L N Q T socket head
screw
Dimensions Corresponding oil pump
interface
F04-A 1/2″ 40 54 17.5 38.1 9 27 Rc1/2″ 13 21.2×2.65 M8×30mm 12.5 outlet,PV2R21,PV2R31outlet of cover end pump
F04-B 11 22.5
F06-A 3/4″ 50.5 65.5 22.2 47.6 11 28 Rc3/4″ 19 30×3.55 M10×30mm 12.5 PVR2outlet,PV2R21outlet of shaft end pump PV2R32 outlet of cover end pump
F06-B 12 28.5
F08-A 1″ 56 71 26.2 52.4 11 30 Rc1″ 26 34.5×3.55 M10×35mm 17 PVR1inlet port
F08-B 14 34.5
F10-A 1-1/4″ 64.5 79.5 30.2 58.7 12 32 Rc1-1/4 32 40×3.55 M10×40mm 19 PVR2inlet port,PV2R3
outlet,PV2R31,PV2R32outlet of shaft end pump
F10-B 16 43
F12-A 1-1/2″ 71 94 35.7 69.9 13.8 37 Rc1-1/2″ 38 50×3.55 - - -
F12-B 18 49.1
F16-A 2″ 87.5 103 42.9 77.8 13.8 38 Rc2″ 51 65×3.55 M12×45mm 17.5 PVR3、PV2R21inlet
F16-B 20 61
F20-A 2-1/2″ 96 115 50.8 88.9 13.8 42 Rc2-1/2″ 63 75×3.55 -O84 - -
F20-B 22 77.1
F24-A 3″ 123 136 61.9 106.4 17 45 Rc3″ 76 85×3.55 M16×45mm 16.5 PVR31、PV2R32inlet
F24-B 25 90
F28-A 3-1/2″ 135 153 69.9 120.7 17.5 46 RC3-1/2 89 100×3.55 - -
F28-B 20 102.8
F32-A 4″ 145 162 77.8 130.2 17 50 Rc4″ 102 115×3.55 - -
F32-B 40 28 115.5

  • Previous:
  • Next:

  • Write your message here and send it to us